what is rubber magnet flexible magnet isotropic anisotropic

 The flexible rubber magnet includ two type, anisotropic and isotropic materials , the anisotropic  is more stronger and  better.
On the basis of this, it can be divided into single-sided magnetic and double-sided magnetic, and can backing the  adhesive  and  pvc ,pp ,pet etc 

Magnetic rubber sheet is also known as rubber soft magnetic, which is made from rubber adding magnetic powder and various cooperating agents.- Shanghai lu jun magnet   .www.lmagnet.com

Magnetic rubber sheet can be used to make single - sided magnetic and double-sided magnetic, but UV light (dumb) light oil;The physical properties of the magnetic rubber sheet are mainly characterized by high specific gravity. Due to the large amount of magnet powder in it, it is 3.8cm3/g, which is the heaviest weight in rubber sheet.High hardness, about 85 degrees;Magnetic properties of 550~750 high;Good flatness and brightness;Good wear resistance and high pressure;Black, dark brown, white, etc.The thickness is 0.3-10mm and the width is 5-600mm. The length can be cut or rolled according to the actual needs.

Magnetic rubber products including rubber disk, extrusion magnetic stripe, fridge magnets, magnetic products, can according to customer specific requirements to make roll film, volume, the shape of the size of (pattern), can be mounted PVC glue, double-sided adhesive, import 3 m, four-color printing, etc., can be single side, double side multipolar magnetization.The magnetic rubber sheet is widely used in doors and Windows sealing strip, toy industry, advertising, vehicle equipment, refrigerator, car 4S4 maintenance shop, etc.Nanjing guber rubber plastic products co., LTD. Has more than ten years of production practice, the production of magnetic rubber sheet has good magnetic properties, high surface finish, precise thickness.Deeply loved by customers at home and abroad.

Original features of flexible, elastic, crooked, after extrusion, calendering, injection, mold molding process to produce to roll, sheet, strip, block, rings, and all kinds of complicated shape.It can also cover PVC sheet, coated paper, double-sided adhesive, UV oil, or color impression cut into various shapes.The processing characteristic rubber magnet consists of magnetic powder (SrO6, Fe2O3), chlorinated polyethylene (CPE) and other additives (EBSO and DOP), which are manufactured by extruding and pressing.Rubber magnetic can be of same sex or opposite sex, can bend, can twist, can roll.It can be used without more mechanical processing, can be used to shape the shape according to the desired size, and can also cover PVC, back glue and UV oil according to customer's requirements.Its magnetic energy product is 0.60 ~ 1.50 MGOe.Production process ingredients to mix, the extrusion/calender/injection molding - processing - magnetized to inspection, packaging [1] performance inspection appearance, size, magnetic, magnetic polarity, hardness, specific gravity, tensile strength, aging resistance, around the property editor this rubber magnets in the application of the period of industry applications: refrigerators, information bulletin, will object fixed on the metal body of fasteners, such as used for advertising used in toys, teaching instrument, switch and sensor of the disk.It is mainly used in micro - electric motors, refrigerators, sterilizers, kitchen cabinets, toys, stationery, advertising and other industries.

Preparation technology and classification of rubber magnetic materials

The manufacturing process of rubber magnetic is similar to other products.In formula design, the variety, particle size and dosage of magnetic powder are determined first.The next step should be based on the use of the requirements to determine the type of rubber, such as the use of natural rubber.In the process of processing, there is no need to add the magnetization process to the other products before or after vulcanization, to give permanent magnetism to the product.The advantage of presulfurization is that the external magnetic field is the same, and the rubber network is relatively smooth.After vulcanization, the refill magnetic flux is poor, but the operation is more convenient.All in all, there are advantages and disadvantages.

Used to characterize the magnetic parameters with magnetic induction intensity, the residual magnetic sensibility, magnetic energy product, such as magnetic induction intensity in the most commonly used, and its unit of measurement for gaussian (GS), general rubber magnetic requirements to the range of 100-600 GS.

The rubber magnet is also known as permanent magnet ferrite, which is made by extruding, pressing, or molding with the adhesive ferrite magnetic powder, rubber or plastic and other materials.Owing to the high plasticity material, finished products or semi-finished products are casual knife cutting, punching, slitting, and mounted on other materials, and not easy to demagnetization, good anticorrosive, mainly divided into two categories: like rubber magnetic and magnetic rubber attract.The difference is as follows:

1. The magnetic properties are different: the magnetic properties of the same sex rubber are weak, while the magnetic properties of the opposite sex are high.

2. The temperature and density of the work are different, and the magnetic density and temperature of the same sex rubber are lower than that of the opposite sex.

3. The application field is different: same sex rubber magnetic field is mainly used in refrigerator magnets, car stickers, printing products, and publicity and promotion products.In contrast, it is widely used in the preparation technology and classification of rubber magnetic fields in micro motors, computers, laser printers, copiers and magnetic toys

The manufacturing process of rubber magnetic is similar to other products.In formula design, the variety, particle size and dosage of magnetic powder are determined first.The next step should be based on the use of the requirements to determine the type of rubber, such as the use of natural rubber.In the process of processing, there is no need to add the magnetization process to the other products before or after vulcanization, to give permanent magnetism to the product.The advantage of presulfurization is that the external magnetic field is the same, and the rubber network is relatively smooth.After vulcanization, the refill magnetic flux is poor, but the operation is more convenient.All in all, there are advantages and disadvantages.

Used to characterize the magnetic parameters with magnetic induction intensity, the residual magnetic sensibility, magnetic energy product, such as magnetic induction intensity in the most commonly used, and its unit of measurement for gaussian (GS), general rubber magnetic requirements to the range of 100-600 GS.

The rubber magnet is also known as permanent magnet ferrite, which is made by extruding, pressing, or molding with the adhesive ferrite magnetic powder, rubber or plastic and other materials.Owing to the high plasticity material, finished products or semi-finished products are casual knife cutting, punching, slitting, and mounted on other materials, and not easy to demagnetization, good anticorrosive, mainly divided into two categories: like rubber magnetic and magnetic rubber attract.The difference is as follows:

1. The magnetic properties are different: the magnetic properties of the isotropic magnet are weak, while the magnetic properties of the anisotropic magnet  are high.

2. The temperature and density of the work are different, and the magnetic density and temperature of the isotropic rubber magnet are lower than that of the anisotropic rubber magnet

3. The application field is different: same sex rubber magnetic field is mainly used in refrigerator magnets, car stickers, printing products, and publicity and promotion products.While heterosexual magnetic rubber, widely used in micro motor, computer, laser printer, copier rubber magnetic, magnetic toys, and other fields into the gay and straight, straight magnetic to better.On the basis of this, it can be divided into single-sided magnetic and double-sided magnetic, and can choose the back glue and non-back glue.

Magnetic rubber sheet is also known as rubber soft magnetic, which is made from rubber adding magnetic powder and various cooperating agents.

Magnetic rubber sheet can be used to make single - sided magnetic and double-sided magnetic, but UV light (dumb) light oil;The physical properties of the magnetic rubber sheet are mainly characterized by high specific gravity. Due to the large amount of magnet powder in it, it is 3.8cm3/g, which is the heaviest weight in rubber sheet.High hardness, about 85 degrees;Magnetic properties of 550~750 high;Good flatness and brightness;Good wear resistance and high pressure;Black, dark brown, white, etc.The thickness is 0.3-10mm and the width is 5-600mm. The length can be cut or rolled according to the actual needs.

Magnetic rubber products including rubber disk, extrusion magnetic stripe, fridge magnets, magnetic products, can according to customer specific requirements to make roll film, volume, the shape of the size of (pattern), can be mounted PVC glue, double-sided adhesive, import 3 m, four-color printing, etc., can be single side, double side multipolar magnetization.The magnetic rubber sheet is widely used in doors and Windows sealing strip, toy industry, advertising, vehicle equipment, refrigerator, car 4S4 maintenance shop, etc.Nanjing guber rubber plastic products co., LTD. Has more than ten years of production practice, the production of magnetic rubber sheet has good magnetic properties, high surface finish, precise thickness.Deeply loved by customers at home and abroad.

Original features of flexible, elastic, crooked, after extrusion, calendering, injection, mold molding process to produce to roll, sheet, strip, block, rings, and all kinds of complicated shape.It can also cover PVC sheet, coated paper, double-sided adhesive, UV oil, or color impression cut into various shapes.The processing characteristic rubber magnet consists of magnetic powder (SrO6, Fe2O3), chlorinated polyethylene (CPE) and other additives (EBSO and DOP), which are manufactured by extruding and pressing.Rubber magnetic can be of same sex or opposite sex, can bend, can twist, can roll.It can be used without more mechanical processing, can be used to shape the shape according to the desired size, and can also cover PVC, back glue and UV oil according to customer's requirements.Its magnetic energy product is 0.60 ~ 1.50 MGOe.Production process ingredients to mix, the extrusion/calender/injection molding - processing - magnetized to inspection, packaging [1] performance inspection appearance, size, magnetic, magnetic polarity, hardness, specific gravity, tensile strength, aging resistance, performance Edit this rubber magnets in the application of the period of industry applications: refrigerators, message sign frame, will object fixed on the metal body of fasteners, such as used for advertising used in toys, teaching instrument, switch and sensor of the disk.It is mainly used in micro - electric motors, refrigerators, sterilizers, kitchen cabinets, toys, stationery, advertising and other industries.

Preparation technology and classification of rubber magnetic materials

The manufacturing process of rubber magnetic is similar to other products.In formula design, the variety, particle size and dosage of magnetic powder are determined first.The next step should be based on the use of the requirements to determine the type of rubber, such as the use of natural rubber.In the process of processing, there is no need to add the magnetization process to the other products before or after vulcanization, to give permanent magnetism to the product.The advantage of presulfurization is that the external magnetic field is the same, and the rubber network is relatively smooth.After vulcanization, the refill magnetic flux is poor, but the operation is more convenient.All in all, there are advantages and disadvantages.

Used to characterize the magnetic parameters with magnetic induction intensity, the residual magnetic sensibility, magnetic energy product, such as magnetic induction intensity in the most commonly used, and its unit of measurement for gaussian (GS), general rubber magnetic requirements to the range of 100-600 GS.

The rubber magnet is also known as permanent magnet ferrite, which is made by extruding, pressing, or molding with the adhesive ferrite magnetic powder, rubber or plastic and other materials.Owing to the high plasticity material, finished products or semi-finished products are casual knife cutting, punching, slitting, and mounted on other materials, and not easy to demagnetization, good anticorrosive, mainly divided into two categories: like rubber magnetic and magnetic rubber attract.The difference is as follows:

1. The magnetic properties are different: the magnetic properties of the isotropic  rubber are weak, while the magnetic properties of the anisotropic are high.

2. The temperature and density of the work are different, and the magnetic density and temperature of the isotropic rubber are lower than that of the anisotropic rubber magnet.

3. The application field is different: same sex rubber magnetic field is mainly used in refrigerator magnets, car stickers, printing products, and publicity and promotion products.In contrast, it is widely used in the preparation technology and classification of rubber magnetic fields in micro motors, computers, laser printers, copiers and magnetic toys

The manufacturing process of rubber magnetic is similar to other products.In formula design, the variety, particle size and dosage of magnetic powder are determined first.The next step should be based on the use of the requirements to determine the type of rubber, such as the use of natural rubber.In the process of processing, there is no need to add the magnetization process to the other products before or after vulcanization, to give permanent magnetism to the product.The advantage of presulfurization is that the external magnetic field is the same, and the rubber network is relatively smooth.After vulcanization, the refill magnetic flux is poor, but the operation is more convenient.All in all, there are advantages and disadvantages.

Used to characterize the magnetic parameters with magnetic induction intensity, the residual magnetic sensibility, magnetic energy product, such as magnetic induction intensity in the most commonly used, and its unit of measurement for gaussian (GS), general rubber magnetic requirements to the range of 100-600 GS.

The rubber magnet is also known as permanent magnet ferrite, which is made by extruding, pressing, or molding with the adhesive ferrite magnetic powder, rubber or plastic and other materials.Owing to the high plasticity material, finished products or semi-finished products are casual knife cutting, punching, slitting, and mounted on other materials, and not easy to demagnetization, good anticorrosive, mainly divided into two categories: like rubber magnetic and magnetic rubber attract.The difference is as follows:

1. The magnetic properties are different: the magnetic properties of the isotropic  rubber are weak, while the magnetic properties of the anisotroare high.

2. The temperature and density of the work are different, and the magnetic density and temperature of the  isotropic rubber are lower than that of the ansiotropic .

3. The application field is different: same rubber magnetic field is mainly used in refrigerator magnets, car stickers, printing products, and publicity and promotion products.For the opposite sex, the magnetic field is used in micro motors, computers, laser printers, copiers, magnetic toys and other fields - Shanghai lu jun magnet  www.lmagnet.com